Sports and Fitness
Our selection of high humidity, high traffic cubicles, duct panels, lockers and bench seating are manufactured to the highest specifications...
Working together with our range of Hydr8 Shower Cubicles and Hydr8 Lockers, Hydr8 Bench Seating pulls out all the stops when it comes to handling tough, wet and humid changing areas.
With a wide range of plain colours, patterns and woodgrains to pick from, Hydr8 SGL (SGL slats) is the preferred choice if you expect very high traffic and need very high impact and water resistance. If the environment is a little less challenging then you may prefer Hydr8 Ligna which sports hardwood timber slats for a more traditional look.
When you consider that Hydr8 Bench Seating is also available in cantilever wall-mounted, floor-mounted or as free-standing island units, all with or without coat rails, you realise that you are on to a winner.
From Leisure Centres to Hotel Gyms and Swimming Pools, Hydr8 Bench Seating performs across a wide range of environments and always look good whilst doing so. Hydr8 Cantilever wall-mounted benching can be used when hygiene is paramount to keep the floor space clear for cleaning and sweeping, whilst floor-mounted and island units can be specified for areas where legs to the floor are not an issue. Add to this the optional integral or wall-mounted coat hook rails and you have the perfect solution for any kind of changing facility. Integrating perfectly with our Hydr8 Shower Cubicles, Hydr8 Changing Cubicles and Hydr8 Lockers provides the specifier with full design and colour co-ordination across the range.
Hydr8 Bench Seating is manufactured from a mild steel box section framework and is Polyester Powder Coated in black as standard. Optionally other RAL colours can be specified. SGL slats are available as standard in a wide range of plain colours, patterns and woodgrains from the appropriate Washroom Colour Collection with 2 slats as standard on the 300mm unit and 3 slats on the 500mm unit. Optionally, hardwood slats can be provided in Ash or Beech timber with 3 slats on the 300mm unit and 5 slats on the 500mm unit. All edges on both SGL and hardwood timber slats are machine radiused and polished for user safety.
These dimensions are typical and for guidance only as our Hydr8 Bench Seating can be manufactured on a bespoke basis is designed to suit the clients specific requirements.
All dimensions are nominal as exact dimensions may vary slightly to accommodate the bespoke nature of the project.
Featuring two swimming pools, a sports hall and a 110 station gym, alongside a steam room, sauna and studios for spinning and Zumba classes, Knowsley Leisure and Culture Park is an extensive, multi-million pound venue for sports enthusiasts that work hard and play harder.
When working in tough, high-use environments with lots of sports equipment being banged about and lots of water and humidity floating around, it takes something that little bit tougher to stand up to the wear and tear. And its a little more difficult if it also has to look good! Designed specifically for high use, wet environments inscapes Extremus range of solid laminate changing and WC cubicles meets this kind of testing environment head on.
In addition to the Changing and WC cubicles the facility also required robust changing bench seating to withstand the volume of customers and working hours of the centre. To meet these demands inscapes Hydr8 range of changing bench seating, manufactured from 12mm solid laminate, provided that balance of good looking aesthetics combined with rugged toughness that was required to shrug off any high-traffic wear and tear.