Complementing our range of Hydr8 Shower Cubicles and Bench Seating the Hydr8 Locker system works perfectly in the same tough, wet and humid changing areas. Available in a range of door materials which include Toughened Glass, postformed HPL and profiled SGL there are a variety of styles and colours to choose from.
Add to this a range of door configurations with three doors as standard, but with four door, two door and single door configurations available if required, there is no challenge that the Hydr8 Locker system will not rise to meet.
Applications:
From Leisure Centres to Hotel Gyms and Swimming Pools, Hydr8 Lockers perform across a wide range of environments and always look good whilst doing so. With a range of different types of door lock, from padlock and hasp to cam and coin return locks, different types of security considerations can be catered for.
If an executive design look is required then Hydr8 Glass doors provide a cool and sophisticated visual statement whilst Hydr8 SGL doors are tough and rugged for more boisterous, high traffic situations.
If you really want to mix it up then Hydr8 M&M (Mix & Match) combining Glass and SGL doors in a random pattern and even colours may be the way to go. For total peace of mind and a total solution our Hydr8 Lockers can be supplied along with Hydr8 Shower Cubicles and Hydr8 Bench Seating for full design and colour co-ordination.
Manufacture:
Hydr8 Locker doors can be manufactured from 10mm Toughened Glass, 12mm SGL or 20mm postformed HPL materials. Toughened Glass and SGL doors have polished edges with radiused corners whilst HPL doors have postformed vertical edges with ABS lipping top and bottom. Carcasses are manufactured from 6mm white SGL to the sides and back and made structurally rigid with vertical aluminium extrusions.
If required an SGL plinth can be supplied to assist with site levelling on uneven floors. As standard this would be a plain plinth to receive a coved flooring finish by other trades or, optionally, can be supplied to match SGL or HPL door colours or in a colour to contrast with Toughened Glass door colours.
To complete your project Inscape can also provide:
- Complete range of WC Cubicles, Duct Panels and Vanity Units
- Shower Cubicles and Bench Seating also available
- Full On-Site installation service
- Off-Site Modular Manufacturing
- Loose sanitaryware
- Stainless Steel Washroom Accessories (soap dispensers, paper towel holders, etc)
- Fitted Furniture & Equipment (cabinets, worktops, tray units, etc)
- CAD drawings provided as standard
- 3D visualisations available to support your project
Dimensions
These dimensions are typical and for guidance only as our Hydr8 Locker Systems can be manufactured on a bespoke basis are designed to suit the clients specific requirements.
| |
Thickness |
Height |
Width |
| Doors |
|
|
|
| — Hydr8 Glass |
10mm Toughened Glass |
1800mm in 1, 2, 3 or 4 door configuration |
300mm or 400mm |
| — Hydr8 SGL |
12mm Solid Grade Laminate |
1800mm in 1, 2, 3 or 4 door configuration |
300mm or 400mm |
| — Hydr8 HPL |
20mm Cosmopolitan or Industria laminated panels |
1800mm in 1, 2, 3 or 4 door configuration |
300mm or 400mm |
| Carcass |
6mm Solid Grade Laminate |
1800mm |
500mm Deep |
All dimensions are nominal as exact dimensions may vary slightly to accommodate the bespoke nature of the project. Typical locker height is 1800mm and will be higher if a plinth is required.
